Tailoring the electron-blocking layer by addition of YSZ to Ba-containing anode for improvement of ceria-based solid oxide fuel cell

The in-situ fabrication of an electron-blocking layer between the Ba-containing anode and the ceria-based electrolyte is an effective approach in suppressing the internal electronic leakage in ceria-based solid oxide fuel cell (SOFC). To improve the thickness of the electron-blocking layer and to research the effect of the layer thickness on the improvement of SOFC, a Ba-containing compound (0.6NiO-0.4BaZr_0.1Ce_0.7Y_0.2O_3-δ) modified by Y stabilized zirconia (YSZ) was employed as a composite anode in this research. SEM analyses demonstrated that the thickness of the interlayer can be simply controlled by regulating the proportion of YSZ at anode. The in-situ formed interlayer in the cell with the anode modified by 20?mol% YSZ possesses a thickness of 0.9?µm which is more suitable for the cell achieving an enhanced performance.     

Effects of ionic radius on phase evolution in Ln-Al co-doped Ca1-xLnxZrTi2-xAlxO7 (Ln = La,Nd, Gd,Ho, Yb) solid solutions

Zirconolite ceramic has been considered as a promising matrix to dispose high-level radioactive waste due to its excellent performance in immobilizing radionuclides. In this work, a series of zirconate solid solutions with stoichiometric Ca_1-xLn_xZrTi_2-xAl_xO₇ (Ln = La, Nd, Gd, Ho, Yb; x?=?0.1–1) were systematically studied to investigate the radius effect on their phase evolution. Powder X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive X-Ray spectrometry (SEM-EDX) were used to characterize the products. XRD and SEM results show that complete solid solutions of Ln and Al in zirconolite phase for Ca_1-xLn_xZrTi_2-xAl_xO₇ cannot found. In the Ca_1-xLa_xZrTi_2-xAl_xO₇ ceramics, single zirconolite phase cannot form, instead of multiple phases, such as zirconolite-2M, zirconia, perovskite and LaTi₂Al₉O₁₉. In the Nd-Al co-doping ceramics, nearly single zirconolite-2M and zirconolite-3O were found at x?≤?0.6 and 0.8?≤?x?≤?0.9, respectively. The miscibility gap between zirconolite-2M and 3O was found at x?=?0.7. Single zirconolite-2M formed in the Gd-Al, Ho-Al and Yb-Al co-doped ceramics can only be detected in a compositional range of 0.1?≤?x?≤?0.8. Higher incorporation contents in these three series can form an additional phase cubic zirconia which is usually a ceramic waste form for radionuclides. Based on the XRD data, lattice parameters of zirconolite-2M and zirconolite-3O were calculated by Pawley refinement method. The evolution of lattice parameters of zirconolite-2M shows great difference between different lanthanide ions, indicating different substitution mechanisms in the Ln-Al co-doped zirconolite-2M.     

Effect of N-doped carbon coatings on the durability of highly loaded platinum and alloy catalysts with different carbon supports for polymer electrolyte membrane fuel cells

An ideal oxygen reduction catalyst for use in fuel cells should exhibit both long-term durability and high activity. In this study, to increase the durability of highly loaded platinum- and platinum-nickel alloy catalysts possessing different types of carbon supports, a nitrogen-doped carbon shell was introduced on the catalyst surface through dopamine coating. As the catalyst surfaces were altered following shell formation, the ionomer contents of the catalyst inks were adjusted to optimise the three-phase boundary formation. Single cell tests were then conducted on these inks by applying them in a membrane electrolyte assembly. Furthermore, to confirm the durability of the catalysts under accelerated conditions, the operation was continued for 200 h at 70 °C and at a relative humidity of 100%. Transmission electron microscopy and electrochemical analysis were conducted before and after the durability tests, and the observed phenomena were discussed for catalysts bearing different types of carbon supports.     

High efficiency synthesis of Nd:YAG powder by a spray co-precipitation method for transparent ceramics

A spray co-precipitation method was developed to efficiently synthesize Nd:YAG nano-powders. The effects of spray speeds and solution concentrations on the crystallization processes of calcined precursors have been studied. The results indicated that the pure phase of YAG could be obtained by three different crystallization processes owing to different homogeneity levels of Y and Al mixing. Pure YAG powder was obtained at 850?°C and the phase purity persisted to 1600?°C. Using the obtained powders, transparent ceramics with the in-line transmittance up to 80.2%@400 nm and 83.1%@1064?nm were fabricated by gel-casting method and hot isostatic pressing sintering. Furthermore, the microstructure and laser properties of the transparent ceramics have been measured. The maximum laser output of 7.015?W has been obtained with an oscillation threshold and a slope efficiency of 0.235?W and 59.4%, respectively.     

快速灵敏的LC-MS/MS法测定人血浆中阿莫西林并应用于两种制剂的一致性评价

目的: 建立快速灵敏的LC-MS/MS法测定人血浆中阿莫西林浓度，并用于两种阿莫西林胶囊的一致性评价。方法: 采用岛津公司LCMS-8060型LC-MS/MS仪，以MRM模式测定阿莫西林（m/z 366.00/114.00）的浓度，d4-阿莫西林作内标（m/z 370.10/114.05），离子源为ESI源。色谱柱选用Waters ACQUITY BEH C18（2.1×50 mm，1.7 μm），梯度洗脱。血浆样本加入内标，经甲醇沉淀蛋白后取上清液进样检测。结果: 所建方法经验证，其线性、准确度、精密度、最低定量限、提取回收率、特异性、基质效应、稳定性等各项指标均符合CFDA的指导原则及最新核查标准要求，并较文献报道中的方法有处理简单、灵敏度高、色谱峰形好的优点。结论: 所建方法快速、灵敏，适用于人血浆中阿莫西林浓度的检测。用于一致性评价的样本实测，两种制剂生物等效。     

Reducing undesirable vibrations of planar linkage mechanism with joint clearance

An optimization design method is presented to reduce the undesirable vibrations caused by clearance for planar linkage mechanism. A clearance joint is defined and considered a contact/impact force constraint. Contact and impact force models for the clearance joint are established using a normal contact force model based on Hertz model with energy loss and a tangential friction model based on modified Coulomb model with dynamic friction coefficient, respectively. In view of the clearance joint, dynamic equations and optimization method for a planar four-bar mechanism are then presented as an application example. The optimization aims to minimize the maximum absolute acceleration peaks of the mechanism by determining the link lengths of the planar linkage mechanism. Finally, the optimization design is solved by a generalized reduced gradient algorithm. Results show evident decrease in vibration peaks of the mechanism and obvious reduction in the contact forces in the clearance joint, which contribute to a good performance of planar linkage mechanism systems.     

抗冲ACR树脂的合成及其性能评价

采用种子乳液聚合法,以丙烯酸丁酯为核层单体、甲基丙烯酸甲酯为壳层单体、甲基丙烯酸烯丙酯为交联剂制备了抗冲ACR树脂。考察了不同加料方式对ACR乳液粒径及对PVC冲击性能的影响,结果表明:连续滴加方式可实现乳液粒径的稳定控制,并能得到性能优异的抗冲ACR树脂。     

转速对齿轮泵内流场空化强度的影响

针对齿轮泵中齿轮转速在500~3652 r/min的变转速条件下工作的实际工况,该文通过实验的方法研究了转速对某型齿轮泵内流场空化强度的影响。使用现有的齿轮泵测试实验台,对在齿轮泵转速改变的条件下,齿轮泵内流场的空化强度改变进行监测。由于空化无法直接测量,该文根据空化诱导振动理论对齿轮泵的振动进行测量,得到了齿轮泵内流场空化强度随齿轮转速上升而增强的规律。通过Pumplinx软件对内流场进行建模,利用软件特有的空化损伤模块进行了仿真验证,仿真结果表明齿轮泵内流场空化强度随齿轮转速上升而增强,与实验所得规律一致。本文所总结的规律对减弱齿轮泵内流场空化强度,提升使用寿命具有一定的参考作用。